How its installed

The right material is chosen for your requirements.  Some detriming of the vehicle maybe required and windows are cleaned to a high standard inside and out and all stickers are removed. Rear windows are tinted using one piece of film which is skillfully heat shrunk and trimmed to conform to your vehicles window shape. Window film is installed to the inside of the glass with no fingers, creases or light gaps.

STAGE 1 Vehicle preparation
We remove any interior trim that will prevent the install of the film. Some makes of vehicle might require glass removal.
STAGE 2 Glass preparation
The glass is then cleaned with the use of cleaning solutions.
STAGE 3 Film preparation
Window film is then skillfully heated to conform to the shape of the glass then trimmed to shape, window film is flat and most vehicles glass is curved.
STAGE 4  Final glass preparation
The final glass clean before install.
STAGE 5 Film Installation
Application solution is applied to the glass and allows for movement and positioning. Once in position the excess solution is removed using heat and a variety of window tinting tools and techniques.
STAGE 6  Re-Trimming the vehicle
Refitting of door cards, weather seals, spoilers, parcel shelves etc.
STAGE 7 Final stage
Glass and window film clean
It can take about 48hrs depending on the weather until the solution has evaporated and the car has the complete Tinted look